1. What Is This Calculator For?

This calculator estimates the volume of sand and metal required for paver installation projects. It helps in planning material quantities accurately.

2. How Does The Calculator Work?

The calculator uses the basic volume formula:

Where:

• \( Area \) — Surface area to be covered (in square meters)
• \( Depth \) — Required depth of sand/metal layer (in meters)

Explanation: The calculation provides the cubic volume of material needed for your paver project.

3. Importance Of Volume Calculation

Details: Accurate volume calculation ensures you purchase the right amount of materials, avoiding both shortages and unnecessary excess.

4. Using The Calculator

Tips: Measure your area accurately in square meters. Typical depth for paver base ranges from 0.1m to 0.2m depending on project requirements.

5. Frequently Asked Questions (FAQ)

Q1: How do I convert square feet to square meters?
A: Multiply square feet by 0.0929 to get square meters (1 ft² = 0.0929 m²).

Q2: What's the typical depth for paver base?
A: Usually 100-150mm (0.1-0.15m) for pedestrian areas, 150-200mm (0.15-0.2m) for driveways.

Q3: Should I account for compaction?
A: Yes, materials compact about 20-30%. Consider adding 25% to your calculated volume.

Q4: How many bags will I need?
A: Divide total volume by bag size (typically 0.5m³ or 1m³ for bulk bags).

Q5: What's the difference between sand and metal volumes?
A: Calculate separately as they typically go in different layers with different depths.